instaling air fule, fule pressure gauges - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

instaling air fule, fule pressure gauges

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • instaling air fule, fule pressure gauges

    how hard is it to install in a 3.4 camaro.
    EDDY MACLEAN

  • #2
    Both are very simple...there is a fuel pressure relief valve on the top of the fuel rail. You will need to remove the schrader valve in it and at that point, you can use it to get your fuel pressure.

    For the A/F ratio gauge, the 3.4L V6 use single-wire O2 sensors so simply tap into one of those wires.
    - Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>

    Comment


    • #3
      what power sources are you using?
      2000 Z28 M-6<br />Loudmouth, TSP Lid, MAF Ends<br />330 rwhp

      Comment


      • #4
        u can use just any 12v source you can find, I pull mine out of the fuse box, out of the fuse thats for my radio ;)

        Comment

        Latest Topics

        Collapse

        There are no results that meet this criteria.

        FORUM SPONSORS

        Collapse
        Working...
        X