Spark Plug Wire Question - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Spark Plug Wire Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spark Plug Wire Question

    I just ordered an Accel Extreme 9000 extreme wire. But I was too excited about the price and didn't get to make sure it would fit on my car.
    The description says "Universal, 8 cylinder, 90 degree boot for HEI or points style cap, spark plug wire kit."
    Will it fit my V6? It says its for 8cyl but I just don't have to use 2 of the wires right?
    1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a>

  • #2
    In theory, it will work.... But also remember, communism works in theory [img]smile.gif[/img] This is a DIY kit, you need to assemble the plug wires yourself!!! Which means cutting to length, stripping the wire, crimping the ends on, and final assembly. If you have the skills, go for it.
    <a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>

    Comment


    • #3
      Making your own wires is really pretty simple. I have made quite a few sets of MSD wires for V6 drivers. MSD sends a special wire stripping tool with their sets, but I don't know if Accel does. If not, I would expect a decent speed shop that does Muscle Car work to have one. This is usually not a tool that you can find at Autozone. Beyond that, it's just cutting, splicing and sliding the boots on. Pretty simple.
      - Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>

      Comment


      • #4
        they should work just fine so long as both ends have 90 degree bends..
        -Brad
        98 Firebird - gone from mod mode to keep it running and useable mode.
        2000 V-Star Custom 1100
        If all else fails use a bigger hammer!
        :rock:

        Comment

        Latest Topics

        Collapse

        There are no results that meet this criteria.

        FORUM SPONSORS

        Collapse
        Working...
        X