questions...please help - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

questions...please help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • questions...please help

    I have a 1995 3.4 camaro...i have a few questions

    1. How hard is it to change the belt tensioner??

    2. How hard is it to change the drivers side power window motor??

    3. Are these jobs I can do at home or do i have to send it to a mechanic??

    4. What are some websites where i can get these parts??
    1995 Camaro 3.4L<br />dynomax super turbo muffler<br />SLP CAI<p>It\'s red so it must be fast!!!

  • #2
    The auto tensioner on the 3.4 is easy. The window can be a bit of a pain but the easiest way os to follow the direction on the website that I hope some one posts b/c I don't have it available. Parts, auto tensioner can be found either at a local parts store or a GM dealer. The window motor can be bought at any parts store. I have done both of these too many times to count. If you need advice, drop me an email.
    Joel<br />God is my copilot, but Satan has his foot on the gas!<br />94 3.4L AutoCamaroRagtop w/MSD ignition,Accelcoilpacks,K&N FIPK,BMR SFC&STB,3\"Catco w/3\"catbackSS muffler,JetStage 2,HomemadePIAAheadlightconversion <a href=\"http://www.geocities.com/cardiac1968\" target=\"_blank\">http://www.geocities.com/cardiac1968</a>

    Comment


    • #3
      Ah, found it!

      http://home.swbell.net/shoebox/windowmotor.html

      If you do a search you will find many answers to your questions.
      Joel<br />God is my copilot, but Satan has his foot on the gas!<br />94 3.4L AutoCamaroRagtop w/MSD ignition,Accelcoilpacks,K&N FIPK,BMR SFC&STB,3\"Catco w/3\"catbackSS muffler,JetStage 2,HomemadePIAAheadlightconversion <a href=\"http://www.geocities.com/cardiac1968\" target=\"_blank\">http://www.geocities.com/cardiac1968</a>

      Comment


      • #4
        I have a tensioner that I bought at advance auto for my 3.4 cuz the pulley was squeaking a lot when cold, and they pulley and bearing alone wasn't the right one, they couldn't even order it they said. But I pulled it off and just regreased the bearing and put it back together. I'm gonna hold on to the one I bought for 2 more weeks I think to make sure mine doesn't squeak again, but after that I'll prolly take it back to get my 45 bux back. Hope that helps on the tensioner question. It's really easy to get to the tensioner too, don't take it to the mechanic or you will need some vaseline.
        1995 Firebird 3.4L<br /><a href=\"http://kansas.no-ip.com/\" target=\"_blank\">My Site</a>

        Comment


        • #5
          When you change it all you do is unbolt it and bolt the new one in??
          1995 Camaro 3.4L<br />dynomax super turbo muffler<br />SLP CAI<p>It\'s red so it must be fast!!!

          Comment

          Latest Topics

          Collapse

          • Andy H
            Transmission removal help!!
            by Andy H
            Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
            2 weeks ago
          • 2.8 Bird
            Abs inop
            by 2.8 Bird
            Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
            3 weeks ago
          • fishin
            Intermittent Headlight Function 97 Firebird
            by fishin
            I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
            3 weeks ago

          FORUM SPONSORS

          Collapse
          Working...
          X