Tweet
Are new pulleys worth it? About how much hp is that?
-
<a href=\"http://www.cardomain.com/ride/2038380/5\" target=\"_blank\">http://www.cardomain.com/ride/2038380/5</a> <br />pacesetter hi-flo cat, slp loudmouth 2 w/3.5 slash tips<br />Springtech lowering springs 1.75 drop<br />Hurst sts w/ short-throw stick<br />Not yet installed-pacesetter headers<br />Zexel-torson lsd<br />3.73\'s -
what kind of car 3.4 or 3.8? 3.4 yes, 3.8 we alrady have UD pullies from the factory.Originally posted by 9camaro9:
Are new pulleys worth it? About how much hp is that?1997 Camaro 15.3@91 with a 2.35 60ft-B&M Ripper, SLP Knob, SLP CAI, LT1 DS, EBC Pads. 1994 Camaro(Sadly Sold)-Hi flow cat, custom flowmaster american thunder cat back, KN FIPK, Accel wires, Plat plugs, 160 thermo, Fastchip, Pacesetters. -
No we don't, at least not on the water pump or alternator. ZZP performance is the only one that makes Water pump and Alternator.
I gained about 3rwhp from the ZZP water pump pulley and drilled 180* t-stat. I will be purchasing the 10% underdrive alternator pulley and longer belt in the near future.-1999 Camaro Coupe 3800 Series II V6 A4 - SOLD<br />-1998 Pontiac Grand Prix GTP coupeComment
-
I know people have asked in the past about regular sized but lightweight pullies (not just alt. or water) for the 3.8 but it was said that noone would make them. I got some info from zzp saying basically that with the new machine they have they could make any pully.
My question is if we had enough people who would preorder if they may consider making sets for our cars. Not ud, just lightweight ones.
(not trying to steal the thread)97 RS<br />Member Status: F-Body Owner<br />Member Number: 7705<br />Registered: September 13, 2005<br />Posts: 24<br />Email Address: hfoxx123@yahoo.com<br />Location: Minnesota<br />Occupation: Database Administration<br />Homepage: <a href=\"http://none\" target=\"_blank\">http://none</a><br />Car: uh a camaroComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
-
Comment