Tweet
ok i heard that if u remove the cat and add headers it leans out the car (or i heard that at the LS1 page, so im assuming it works for us) now i also heard that adding a lower tstat would richen up the car, so in theory wouldnt they cancel each other out (no cat + 160 tstat) or am i imagining things
-
98 Jeep Grand Cherokee 5.9 Limited<br /><br /><br />MODS:<br />180* t-stat, K&N FIPK, mopar ECU,<br />mike leach long tube headers+3\" y-pipe, 3\" all the way out flowmaster 50 series, mopar magnum 2bbl m1 intake manifold, APS 52mm throttle body, powerslots, 2 JL 10w3\'s -
The PCM should correct for the lower back pressure by itself. So, unless you have a lean condition after making the modifications, you probably don't have to worry about correcting it.<a href=\"http://www.fatninjas.com/camaro\" target=\"_blank\">\'96 Camaro Convertible</a>
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment