getting ported heads off a bonneville - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

getting ported heads off a bonneville

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • getting ported heads off a bonneville

    im getting ported heads off of a bonneville... i talked to a friend and he said i would also need a maft+ box too.... first of all how much will it cost to get the heads installed and where can i get the box cheap... should i take off my JET PCM if i do this? Thanks!
    Mystic Teal Metallic
    ET:15.1 NA 14.3@96 MPH 75 Dry Shot

  • #2
    http://www.camarov6.com/ubb/ultimate...c;f=8;t=005718
    00 Pewter Y87 Camaro-SS Hood/Chrome rims, Black Halos, Clear corners, Pacesetters, V8 K&N FIPK, 3\" B&B TriFlow, HPP3, MSD Coils, Taylor wires, Transgo stage II, Edge 3000 Stall, 180* thermo, SLP Bowtie Grill<br /><a href=\"http://www.cardomain.com/memberpage/468763/1/\" target=\"_blank\">Carro</a>

    Comment


    • #3
      thanks will the heads fir its off a 3800 non supercharged
      Mystic Teal Metallic
      ET:15.1 NA 14.3@96 MPH 75 Dry Shot

      Comment


      • #4
        ??
        Mystic Teal Metallic
        ET:15.1 NA 14.3@96 MPH 75 Dry Shot

        Comment


        • #5
          are they from a series II? If from a series I, probably will not fit then.
          http://www.bowtiev6.com/

          Comment


          • #6
            Teal99-

            you can only use heads off of a NON supercharged 3800 series II.

            The heads from a supercharged 3800 II have injector bosses in the heads instead of in the intake manifold.

            Double check your compatibility before you spend any money.
            1999 red camaro v6 M5: with a turbo<br />13.52@107.99<br />No, seriously: Who Farted? <br /><a href=\"http://www.cardomain.com/memberpage/600086\" target=\"_blank\">http://www.cardomain.com/memberpage/600086</a>

            Comment


            • #7
              i'm getting it free.. my friend works at a dealership and he got it for free off a bonneville with bottom end problems... Turns out that it isnt ported though.. the tech at the dealership ported this 2.4l head..
              i want to get it ported or port it myself.. I might send it out to someone on the forum who can port it.
              Mystic Teal Metallic
              ET:15.1 NA 14.3@96 MPH 75 Dry Shot

              Comment


              • #8
                just check for machine shops in your area; most places won't charge more than 100 a head for a decent 3 angle job.

                if you're getting them for free, consider yourself lucky.

                Comment

                Latest Topics

                Collapse

                • Andy H
                  Transmission removal help!!
                  by Andy H
                  Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                  3 weeks ago
                • 2.8 Bird
                  Abs inop
                  by 2.8 Bird
                  Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                  3 weeks ago
                • fishin
                  Intermittent Headlight Function 97 Firebird
                  by fishin
                  I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                  3 weeks ago

                FORUM SPONSORS

                Collapse
                Working...
                X