I'm trying to remove the fuel injectors from a fuel rail for a 98 Camaro with a 3.8 V-6 engine. The fuel rail has been removed completely from the engine. I removed the retainer clip, and tried pulling on the injector with a lot of force with a twisting motion and the fuel injector won't break free. Any suggestions or tips on removing these injectors?
Announcement
Collapse
No announcement yet.
Fuel Injector Replacement
Collapse
X
-
Re: Fuel Injector Replacement
it's a pita trying to remove these injectors. they are located in a tight spot also. Remove the retaining pin first and then start twisting and wiggling it to try to get to loosen up then give it all you got pull the fuel injector out. if it's still tight wiggle it again and pull it out. Hope this helps to those who encounter the same problem.
Comment
Latest Topics
Collapse
-
by ssms5411Had to be evacuated Monday again after a fire was going on the hill behind us. Only 3-4 hours, they did a good job getting it under control. Especially...16 hours ago
-
by RPDRed6Up for sale is my 2001 Chevrolet Camaro 3.8 in need of some TLC and help. I’ve owned this vehicle the past 18 years (since 2006) and it’s been very...2 weeks ago
-
by ssms5411So went out to start the Camaro and no start, batteries are good just hear a thud sound, started up fine last Friday. Check the fuses and the battery...2 weeks ago
-
Working on getting my 99 Camaro back in action. Long story short, got parked in the garage about 5 years ago (kids, career stuff ect.) trying to get her...2 weeks ago
-
by AZ3.8CamaroI have a 15 year boy now (crazy how time flies from when I was a teenager on here!) and his first car will be the old Camaro.
I stopped driving...3 weeks ago
Comment