Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If anyone can help I have been working on my buddys 1994 Trans AM 5.7L, I thought that his thermostat was stuck open so I changed it. Now he has little more heat than before but my question is what else can be causing his car not to have heat, and also when he accelerates he loses his heat..........Please Help
Things done so far: New Thermostat, New Radiator,Coolant 50/50 mix Air was bleeded out of system
I swear this os [img]graemlins/bs.gif[/img] and i am :mad:
1995 Chevy Camaro 3.4L<br />K&N air filter<br />Centerforce Dual Friction CLutch<br />Flowmasters 3\' pipes<br />Pioneeer Sound System
ok i have flushed the radiator system got all the air out and he is not having any problems with the cooling system, what else can it be ??
it starting to get cold in chicago please help
1995 Chevy Camaro 3.4L<br />K&N air filter<br />Centerforce Dual Friction CLutch<br />Flowmasters 3\' pipes<br />Pioneeer Sound System
Seriously, check the vacuum controlled side of the hvac system. There is a door in the duct system that is usually moved by a vacuum controlled actuator. This door determines whether or not air passes through the heater core. You may have a dry rotted fitting that is seeping vacuum, and the actuator/door may not be functioning correctly.
You can achieve anything for which you are prepared to pay the price.<br /> --ATTILA THE HUN
<blockquote>quote:</font><hr>Originally posted by apiccola: Seriously, check the vacuum controlled side of the hvac system. There is a door in the duct system that is usually moved by a vacuum controlled actuator. This door determines whether or not air passes through the heater core. You may have a dry rotted fitting that is seeping vacuum, and the actuator/door may not be functioning correctly.<hr></blockquote>I'm with appacola on this one - I have seen it happen many times - the air is not properly directed because the doors are not being fully actuated. The most likely location for a vacuum leak that will cause this type of problem: in the lines to or from the vacuum reservior. GM uses very thin, stiff, spagetti line. It can be replaces with the regular rubber line; the fitting match.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
4 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment