More signal troubles - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

More signal troubles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • More signal troubles

    I am having trouble with my turn signals after going through a car wash

    Well upon advice i replaced all my bulbs and still no dice

    yet when i put my hazards on everything does work, its only the turn signals that dont... any ideas?
    99 3.8 Camaro (M5) Y87

  • #2
    Sounds like the flasher....its located under the dash....the turn signal and hazards are different flashers....its a small roundish unit that is clipped in on the right side about 6 inches from the instrument cluster
    <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

    Comment


    • #3
      Thanks- ill give it a try in the mornin!
      99 3.8 Camaro (M5) Y87

      Comment


      • #4
        Bro, i just had the same problem with mine...i just went and picked up a 3 dollar flasher from R&S, and replaced itin the parking lot. It took like 2 minutes.The flasher is right behind the knee bolster on the driver's side of the car...its held in a little "U-shaped" holster surrounded by like a thousand wires. Just unplug the old, and re-plug the new...and ur set to go.

        Comment

        Latest Topics

        Collapse

        • FirebirdGT
          New Site Hosting Issues
          by FirebirdGT
          All - sorry but there seems to be some glitches from moving to a new Host - hopefully they will be fixed soon.

          If needed you can email me...
          1 week ago
        • LETZRIDE
          New Owner!
          by LETZRIDE
          I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
          3 weeks ago
        • LETZRIDE
          Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
          by LETZRIDE


          Building the Tom Henry RS
          Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
          By: Hib Halverson


          At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
          Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
          02-07-2020, 11:30 PM

        FORUM SPONSORS

        Collapse
        Working...
        X