calling : Anyone who has done a console swap

[Big Tymer]

i have a 94 camaro and i just put in a 2002 console.... everything when fine untill i got to the cig lighter

how i get it going? i know orange is pos and black is neg.... where i go from there?

thanks... detailed instructions for me would be fab...

[C.O.Jones]

Have you checked this out already?

(Sorry if you did)

http://www.bfranker.badz28.com/fbody/console.htm

[hockeyman]

I was gonna do this swap until I saw the gaping hole above the front of the new console and my dashboard. I couldn't think of anything that would fill the void, so I nix'ed the project.

-Marc

[MississippiMaro]

I actually want to do this swap FOR the gaping hole. I've always wanted an LCD Screen for GPS, DVDs, etc. I think it would fit nicely in there.

[hockeyman]

<blockquote>quote:</font><hr>Originally posted by MississippiMaro:
I actually want to do this swap FOR the gaping hole. I've always wanted an LCD Screen for GPS, DVDs, etc. I think it would fit nicely in there.<hr></blockquote>

Hmmm, not a bad idea [img]graemlins/thumbsup.gif[/img]

-Marc

[Big Tymer]

<blockquote>quote:</font><hr>Originally posted by C.O.Jones:
Have you checked this out already?

(Sorry if you did)

http://www.bfranker.badz28.com/fbody/console.htm<hr></blockquote>

yes i used that actually to install. i actually posted it on another post where someone asked about the swap. BUT its not correct
The new cigarette lighter uses the same clip as the old one did. There are two wires that plug into the cigarette lighter; one is orange (+) and one is black (-). Now it is time to make the auxiliary power connection. I used the existing cigarette lighter wires to power the new power port as well. There are two blade type connectors on the new power source. I spliced and soldered wires into these existing wires crimping blade female connectors onto the new ends that will plug right into the new power source. The Orange wire plugs onto the centers clip of the new power source and the Black wire plugs onto the perimeter clip.

the connectors arent the same...as stated... the pic is even dif looking
[IMG]
http://www.bfranker.badz28.com/fbody/i47.jpg[/IMG]