light came on today when i started the car and it stayed on til i got home from work. nothing has been changed on the car in awhile and i didn't do anything different. why would it come on?
Announcement
Collapse
No announcement yet.
ABOS Inop
Collapse
X
-
mine comes and goes also, there is a kink in the return line for the abs system on mine. it comes and goes, i know what the problem is so im not to concerned about it. check your booster for the return line and trace it back, mine was about 6 inches from the booster, atleast i think its the booster.Pain heals, chicks dig scars, and glory is forever.<br /><br />------------------------------<br />1997 Red Firebird with T Tops<br />Custom 3\" cold air intake <br />K and N filter<br />!maf<br />flowmaster 80 series catback<br />Accel 8.8 300+ spiral ferro wires<br />Bosch 2X platinum +4 \'s
-
Check your grounds on the core support and the top of the fender on the passenger side. They have bad grounds from the factory. Take them all off and sand the paint off where the bolt goes and put the bolt back in.1999 Silverado- Bagged, colormatched and rollin on stock chrome 16\'s<br />Make love not war, hell do both, get married
Comment
-
might just have a bad sensor too. They had to replace mine at 4000miles cause my abs inop kept coming on.y87, GFX pkg, 5 spoke chrome rims, and 20% tint, 69 chrome camaro fender emblems, 2 3/4 inch cowl hood, built 3.8 series 2 motor(all forged),Heads and Cam, race prep trans, 3200 stall, full exhaust, and some suspension work.
Comment
-
Clean your battery terminals, mine did the same thing ;)<a href=\"http://www.cardomain.com/id/briansr\" target=\"_blank\">97 White Pontiac Firebird 3.8 A4</a><br />Mods- 2.75\" exhaust, Dynomax muffler, magnaflow cat, SLP CAI, Hypertech 160* thermo, Fan switch<br />Suspension-Kumho Ecsta 712\'s, 32mm/19mm sway bars<br /><br />Our Lady of Blessed Acceleration, don\'t fail us now. <br />-Elwood Blues
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
Comment