Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I've been trying to get down a stand still burnout in my 5 speed firebird, dropping the clutch at around 4000-5000 rpms and it always wants to move forward while burning out . I've seen a v6 firebird do one and I was wondering if there is a trick to doing stand still burnouts?
Are you holding your brakes after you drop the clutch? From your post I can't figure out if your brakes aren't holding you in place or if you are just dropping the clutch and not hitting the brakes.
yeah I you need to lightly hold the brake pedal down, it's not exactly good for the rear brakes but the extra front bias means so long as you don't mash the brake hard you won't be applying much pressure to the rear.
-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:
You should not have to go above 4,ooo. I can do a burn out droping the clutch at 4K and lightly holding the brakes with 275/40-17's and limited slip, and when it starts to spin good you will have to let off the gas pedal some unless you are holding the brakes to hard.
I thought I might have to tap the brakes, I tried it the other night and when i hit the brakes my tires stopped spinning completlly... I must have tapped them to hard. Its difficult to lightly push the brakes right after dropping the clutch, but i will try again tonight. Thanks for the info.
I'm convinced i can't do a stand still in my car, i tried about 5 times lightly holding the brake, it started burning out going sideways but i was still going forward. Any ideas?
I've got a question that could be along the lines of this topic...
Will a bad clutch not "grab" the driveshaft when trying to do a burnout and just spin, or is that another problem? It seems whenever I drop the clutch my RPMs go up but my tires don't spin, they move slowly. I then shift it into 2nd and it seems the clutch isn't grabbing. So I hold it in and let it back out and it grabs 2nd. Is my clutch almost gone?
<b><i>Don\'t Ever Judge Me</i></b><br /><a href=\"http://www.cardomain.com/id/earnhardt132000\" target=\"_blank\">\'96 Firebird Y87 3.8L V6 5spd</a><br />--No mods as of yet, shoot me some ideas if ya want.<br />178,000 miles and counting
Originally posted by Earnhardt132000: I've got a question that could be along the lines of this topic...
Will a bad clutch not "grab" the driveshaft when trying to do a burnout and just spin, or is that another problem? It seems whenever I drop the clutch my RPMs go up but my tires don't spin, they move slowly. I then shift it into 2nd and it seems the clutch isn't grabbing. So I hold it in and let it back out and it grabs 2nd. Is my clutch almost gone?
its getting there and each time you do that you make it worse.
-Eric<br /><a href=\"http://www.cardomain.com/id/mustangeater82\" target=\"_blank\">2000 NBM V6 Camaro 5-speed</a> T-top <i>converted</i><br /><b>14.467@95.45mph</b> <i>$0 in mods</i><br /><i>The member formerly known as MustangEater8251</i>
Okay forget i ever doubted the firebird could do a standstill. It was raining so i took my car back out and I got my tires spinning at about 4000 rpms from a stop, i started moving forward so i started to lightly push the brake pedal and my car started slowing down, so then i pushed down harder and the car came to a complete stop and while i was holding the brake i was able to spin the tires between 2000-5000 rpms! I stopped when i saw the tires smoking.... it was awesome thanks for the help guys
I haven't done it for about a month, until today. I tried launching my car while racing my friend, but instead the above happened. I usually wait until I feel the clutch grab, then floor it. Nevertheless, I lost to a Lumina [img]tongue.gif[/img] .
<b><i>Don\'t Ever Judge Me</i></b><br /><a href=\"http://www.cardomain.com/id/earnhardt132000\" target=\"_blank\">\'96 Firebird Y87 3.8L V6 5spd</a><br />--No mods as of yet, shoot me some ideas if ya want.<br />178,000 miles and counting
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
. I've seen a v6 firebird do one and I was wondering if there is a trick to doing stand still burnouts?
Comment