Tapping into fuse box for power source for gauges - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Tapping into fuse box for power source for gauges

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tapping into fuse box for power source for gauges

    I have three gauges I need to connect into the fuse box for power that will get turned off by the ignition, but have no idea how to tap the wire ends into the box and where at on the box they even go. any help would be appreciated! thanks!
    2000 Z28 M-6<br />Loudmouth, TSP Lid, MAF Ends<br />330 rwhp

  • #2
    Get a fuse tap from your auto parts store. Plug it in to the IGN receptacle next to the IP DIMMER 5 amp fuse in your dash fuse box.
    You can achieve anything for which you are prepared to pay the price.<br /> --ATTILA THE HUN

    Comment

    Latest Topics

    Collapse

    • Andy H
      Transmission removal help!!
      by Andy H
      Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
      3 weeks ago
    • 2.8 Bird
      Abs inop
      by 2.8 Bird
      Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
      3 weeks ago
    • fishin
      Intermittent Headlight Function 97 Firebird
      by fishin
      I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
      3 weeks ago

    FORUM SPONSORS

    Collapse
    Working...
    X