I installed my fan switch the other day, and it wont come on when I flip the switch. (sometimes it works, mostly it doesn't)
Here is how I ran my wiring:
-Power comes from accy position in fuse panel inside of the door
-Leads to lighted switch which is grounded to the car
-wire from switch tapped into green wire next to pcm labeled "J"
I'm pretty sure it's hooked up right because I've got it to work a few times. I've also tried another switch but it didn't seem to help. Could I just have a bad connection in the tap?
Thanks for any help.
Here is how I ran my wiring:
-Power comes from accy position in fuse panel inside of the door
-Leads to lighted switch which is grounded to the car
-wire from switch tapped into green wire next to pcm labeled "J"
I'm pretty sure it's hooked up right because I've got it to work a few times. I've also tried another switch but it didn't seem to help. Could I just have a bad connection in the tap?
Thanks for any help.
Comment