need a pic of the top of a 3.8L - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

need a pic of the top of a 3.8L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need a pic of the top of a 3.8L

    I need a pic of the top sides of a 3.8L
    There is a bolt on either side of the intake
    but it doesnt go through the intake. It goes
    straight into the head.

    I circled the area of the bolt that I need to
    Identify in RED.
    thanks!
    Attached Files
    2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

  • #2
    Re: need a pic of the top of a 3.8L

    if im seeing it correctly its the bolt holes for the bracket that holds the ignition control module and coil packs.

    Comment


    • #3
      Re: need a pic of the top of a 3.8L

      yea, I was thinking that
      but these bolts are on both sides, they dont touch the intake at all, goes straight into the head
      I just want a pic of the bolts, so I know what bolts to put back in
      OH well, NO biggie!! thanks
      2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

      Comment


      • #4
        Re: need a pic of the top of a 3.8L

        the actual stock bolt is a 13mm head with torx in the head also.
        the other side is for the alternator back stiffener bracket. i can take a pic if u need it.

        hope this helps.
        dan

        Comment


        • #5
          Re: need a pic of the top of a 3.8L

          brackets:
          http://pg.photos.yahoo.com/ph/usd2si...d6.jpg&.src=ph

          bolts:
          http://pg.photos.yahoo.com/ph/usd2si...&.dnm=3acd.jpg

          Comment


          • #6
            Re: need a pic of the top of a 3.8L

            AWESOME!!! thanks!! thats the bolts I was using, just wasnt sure if it was the right one
            I looked in my head and the hole goes all the way through, so oil could come out if that wasnt screwed in all the way
            thanks again!!!
            2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

            Comment


            • #7
              Re: need a pic of the top of a 3.8L

              no prob, happy to help.
              peace

              Comment

              Latest Topics

              Collapse

              There are no results that meet this criteria.

              FORUM SPONSORS

              Collapse
              Working...
              X