fog light help

[paarman97maro]

How do you replace a foglight on a 97 Camaro? Do you have to remove the plastic cover, and replace the seal with silicone, or what? I know the screw in front just adjusts the hight of the light, but I cannot see how you would get the light out to replace it. Thanks for any help, and yes i have run a search, but i didnt really come up with anything for a 97 camaro. Thanks again

[geocor]

Go from the bottom of ,right underneath the area where the fog lights are.There is a little square access panel,just swing it out & voilla the bulbs will be there!

[paarman97maro]

thanks man [img]smile.gif[/img]

[paarman97maro]

I dont know if you were thinking of a different year, but there is no little square access panel that i could find... i could barely fit my hand into the area where the bulb was, so unless this is harder than im making it, someone please fill me in on how to change a fog light bulb on a 97 camaro... thanks [img]smile.gif[/img]

[geocor]

Thought it was the same as my '98?If there is no screws on the lenz ,its probably like a 98+, where you have to remove a panel or something & get it from behind?!

[paarman97maro]

yes... im assuming thats what you have to do, because there are some panels at the bottom, and i treid to squeeze my hand around them, barely touched the blub harness though lol... so ill have to mess around with the panels im assuming... thanks

[montytrmpt]

This should answer all your questions...

http://www.bfranker.badz28.com/fbody/fogs.htm

[paarman97maro]

Thanks, that guide solved my problem [img]smile.gif[/img]