Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
so is it the prothane tranny mount of the energy suspension tranny mount....
so is it the prothane tranny mount of the energy suspension tranny mount....
that leaves a gap which makes you have to fill it with washers?
im gonna get a polyeurothane transmission mount but dont know which one requires you to fill in the gap.
thanks.
-Tyler
96 Camaro M5. Dark metallic gree (?dont know the offical color name)<br />Home made Intake :: Headers, 3inch headers back to Flowmaster muffler :: spec stage 3 clutch Now installed, waiting for 3.42\'s and LSD next month<br /><a href=\"http://photobucket.com/albums/y192/RiceEatingCamaro/?action=view¤t=newcar.jpg\" target=\"_blank\">My Car</a> <br /><br />Totalled Car.<br /><a href=\"http://bellsouthpwp.net/s/k/sk8er305/\" target=\"_blank\">96 CamaroRS</a>
well, we have the same year and trans of camaro, and i have the ES one. check the writeup i did on my website (in my sig, the Modification Review Page).
96 Camaro M5. Dark metallic gree (?dont know the offical color name)<br />Home made Intake :: Headers, 3inch headers back to Flowmaster muffler :: spec stage 3 clutch Now installed, waiting for 3.42\'s and LSD next month<br /><a href=\"http://photobucket.com/albums/y192/RiceEatingCamaro/?action=view¤t=newcar.jpg\" target=\"_blank\">My Car</a> <br /><br />Totalled Car.<br /><a href=\"http://bellsouthpwp.net/s/k/sk8er305/\" target=\"_blank\">96 CamaroRS</a>
Hey Ian, for the $30 for the tranny mount, you think I should swap the prothane for an ES, or go to the bother of getting a solid aluminum shim machined to fit in and fill in the gap? Im a little pissed because I went with prothane since people claim they didnt have to drill out the crossmember with them, which I did anyway and now have this other problem to deal with.
\'01 Mineral Grey SVT Cobra<br />-former F-body owner
if i were you, id probably just return the prothane one and get the ES one. i cannot vouch for the prothane one, as i have never used it, but i know for a fact that the ES one i got, after i drilled the crossmember, was fine. there was not a space issue or anything like that. I would much rather have the mount itself flat on the crossmember than use a shim and everything. hope that helps.
I guess it would be the height of them that would be important. Ian, did you block the tailshaft of your tranny so it stayed neutral when you put the new mount in, or did it drop a little and the push it back up into place with the new mount? what happens if I just let the tranny drop that 1/2" in the back? thats going to put stress on the seal up fron and Im going to blow that, arent I?
\'01 Mineral Grey SVT Cobra<br />-former F-body owner
ellik, when i did the mount, i jacked the front of the car up by the k-member with a floor jack, and used the wimpy little jack in the car to support the tranny. i raised the wimpy jack to just touching the tranny, and then unbolted and dropped the crossmember. i didnt lift or move the tranny at all. i dropped the crossmember and let the jack support the tranny, then bolted the ES mount on, drilled the new hole for the bolt, and bolted the crossmember back up. you shouldnt move the tranny at all.
when you do the ES one, take some pics from the rear of the trans facing the crossmember if you can. that will help people with your gap fix if the ES one gives you the same problem.
will do.... was going to do pics last time, but sort of forgot till the car was off the jackstands. if the ES doesnt work, Im getting an aluminum shim machined to put in to take care of the gap. I really dont like all those washers. If I have to do that, I'll post dimensions for the shim too.
\'01 Mineral Grey SVT Cobra<br />-former F-body owner
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment