2 or 3 of my wheels are rattling over bumps now, and when i kick them, it started off with 1, and i thought it was the caliper, but i'm not so sure now. i am going to take it in, the one that scares me the most is the rear driver side, it rattles over bumps and it makes kinda a scraping sound when backing up. would these be bearings, and if so, are they going to have the differential apart, and should i replace it with synthetic, and how much is this going to run me?
Announcement
Collapse
No announcement yet.
wheel rattle
Collapse
X
-
Re: wheel rattle
The only way differential fluid (Standard or Synthetic) fluid will help you right now is if it's low. Other than that, you're probably looking into a rebuild. That can cost well over $350 for labor alone..and that's being conservative.
You're probably better off finding a replacement rear.
What happens when you kick the wheel? Is the vehicle in the air or on the ground?Last edited by hockeyman; 04-24-2006, 10:00 PM.sigpic
-
Re: wheel rattle
its really tough to explain what it does, its like a rattle, but i dont think its a rattle like you are thinking, i am saying when i get it fixed they are obviously going to have to drain the diff, should i switch to synthetic when they do, if its as bad as a rebuild i'm gonna go raid a huge junk yard and find a z28/trans am to rip one off of :)
Comment
-
Re: wheel rattle
Originally posted by bahif its as bad as a rebuild i'm gonna go raid a huge junk yard and find a z28/trans am to rip one off of :)sigpic
Comment
-
Re: wheel rattle
a caliper bolt had fallen out, doh, so i'm pretty much going to have to repaint that caliper, and it dug a little groove on the inside of my wheel, i dont really feel like replacing, idk what i want to do yet
Comment
-
Re: wheel rattle
Be thankful that it was that and not an issue with the rear. I just replaced a pinion bearing in my rear and it hurt my wallet pretty bad. I didn't want a used rear because my gears and clutch packs were in good shape and you never know what a used rear has been through.
Comment
Latest Topics
Collapse
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment