I got a 95 camaro with only 60k miles on it and tonight I went to start it up and drive to my step dads house and my headlights wont turn on. I don't know what is wrong with them. the high beam works fine it's just the low beam and both of them don't work. I pulled the headlight out (not the bulb that mofo is in there and ain't coming out) and unplugged it and tested it with a continutity tester and there was no continutity. I turned the headlight switch on and there was continutity but only one way. I first thought this was normal cuz the switch has to be on in order for electricity to flow but then I took out the high beam and tested it and there was continutity flowing through it even though the headlight switch was off and the high beam was off. I checked the owners manual and my haynes manual and both of them talk about a headlamp circuit breaker but they don't say where it is located all they say is to take it to a dealer. Any suggestions of what it could be.
Announcement
Collapse
No announcement yet.
Headlights Need Help
Collapse
X
-
Re: Headlights Need Help
Your headlights are sealed units - the bulbs aren't changeable. Need new low beams - PepBoys or AutoZone carry - cheap.95Camaro3.4T5Conv Red/White*SLP Bilsteins*BMR Tower Brace*CAI*NiehoffIgn*NGK PlatPlugs*DelcoHiPerfWires*FlowmasterCatback*RedDe vilReso(no cat)* DynoMax Muffler*B & M Shifter*Eurolite Lamps*Yokohama Avid 235/55/16*GM 3.73s*Auburn LSD*Sirius*All DONE!
-
Re: Headlights Need Help
yep must be the low beams. i brought it into my auto class and took out the headlights and turned the switch on and checked it with a test light and its getting power so the bulbs must be burnted out. any one know why they make them sealed so you cant change the bulbs?
Comment
Latest Topics
Collapse
-
by Andy HHey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...4 weeks ago
Comment