Tweet
Here's the deal. I gotta 98 v6. About three months ago I changed the coils, wires, and plugs. Coils and wires are all MSD. There were no immediate issues. Recently, however, the engine lights been on, displaying the code for a misfire on cylinder 3. I checked the wire for what I THOUGHT was cylinder 3. It occurred to me that I'm not absolutely certain which cylinder is 3, even though I made pretty sure I had it right when I first changed everything. Does anyone have the cylinder configuration on the 3800 v6? If I'm right, then cylinder 3 should be first plug on the right, facing the car from the front.
-
-
Re: Cylinder 3 misfiring.
nope, 3 is middle plug on drivers side(which is really left side)2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls! -
Re: Cylinder 3 misfiring.
FRIGGIN THANK YOU. Makes more sense outta the whole thang.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...6 hours ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 days ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...2 weeks ago -
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...3 weeks ago
-
Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....4 weeks ago
Comment