well i changed the oil sending unit nothing more than a sensor and oik pump any other ideas
Announcement
Collapse
No announcement yet.
Rough Idle only in Drive
Collapse
X
-
rule out vacuum leak and faulty MAP sensor. sounds like its missing at closed throttle under a light load, and when you open throttle its okay. this is likely a sign of pcm not receiving accurate info about the amount of air the engine is receiving (vac leak or faulty MAP sensor/circuit will cause this)
although it COULD be base engine, i'd rule out the good stuff first.ASE Master, L1, X1, C1. Instructor in automotive systems. 99 3800 4L60E with a few mods and a greatful dead sticker on the back window.
Comment
-
anybody figure this out? seems like a bit of a problem for these auto 3.4's
is there a way to bump the idle a tiny bit? mine stops vibrating with a tap of the gas. The vibration gets worse with a drain on the engine (ie. when the A/C is on).
I thought it was just a bad muffler. I'm gonna change that first.
Comment
-
Turn down your 1 billion mega watt stero while you are driving and the shakin will go away LOL!
[img]graemlins/rock.gif[/img] (just thought I would throw a little humor in).
[ September 02, 2004, 12:11 PM: Message edited by: saved1 ]95 convertible 3.8 series II
Comment
-
I didn't read all the replies so forgive me if this has been suggested..
I would first check if it was a misfire..
When you put the car under a load (put it in drive) it might be misfiring.
You can also check the fuel pressure.
Mine was about 36 cold and we bumped it up to 39-40 cold and it idles smoother now [img]smile.gif[/img]<b><a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six©</b></a><br /><a href=\"http://www.sounddomain.com/id/95batmobile\" target=\"_blank\">My \'95 Bird</a><br />I am not afraid of storms, for I am learning how to sail my ship.
Comment
Latest Topics
Collapse
-
by Andy HHey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...4 weeks ago
Comment