Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
97 is a one owner car but PO didnt do the dexcool swap
at 5 yrs. Car only has 50 K but dexcool looks like mud.
No Dexcool Flames as I will replace with it again,never had any problems
with any other GMs and Dexcool.
What will safely remove the slime?
Again dont try and change my mind on Dexcool.Also I dont wait for 5 years to swap it out anyway.
hmm.... I know GM makes stuff to flush the system with but i'm sure an auto parts store would too. I would just undo the hoses from the radiator and flush that seperatly first. with or without the flush product. i would do a lot of water from your water hose, maybe even warm water until it looks good. Then hook everything back up except not into the radiator and flush it again through out the engine. don't forget to run the heater so it will go through the heater core.
what he said^^^^^, the auto parts flush chemical did not work for me, so i just recommend using water.
<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.
yes, i flushed and flushed, even changed my radiator. I STILL FIND SLIM AND MUD. I took my cap off and did some experimenting. The only thing that will remove the mud and slim is gas and carbcleaner. This might sound like a bad idea, but you may want to remove the tstat, and on a COLD ENGINE, mix like 2 gallons of carb cleaner into the radiator and run the engine for a minute, drain the cleaner, and keep flushing with water. Honistly, i dont think we will ever get it all out.
<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.
Honestly, i dont think we will ever get it all out.
I've changed out that dexcrap over two years ago and I still find bits of that sludge under the rad cap:rant:
I wish someone would invent something that would dissolve the buildup so it can be flushed out.
LOL, same here, but like i said, the only think that can do that is carbcleaner, but use at our own risk!
<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.
I've changed out that dexcrap over two years ago and I still find bits of that sludge under the rad cap:rant:
I wish someone would invent something that would dissolve the buildup so it can be flushed out.
Hence my starting this topic.
Still looking for solutions.
In the old days we used to "clean" rust build up(quite common on old iron
engines) with some muratic acid diluted.
A triple flush of plain water was done before a refill with antifreeze.
Dont do this on todays engines!
call me crazy but might some plumbing clog remover like, well liquid plumber work. as long as you flush it all out it shouldnt harm the cooling system right? it would help to break up alot of the sludge and well "S- H- I- T-" in the cooling system. just a thought
do not put drain cleaner in your car, that is an acid and will start eating the metals as soon as you pour it in! Ask any plumber what they think about the drain openers and they will tell you. infact if you use a drain cleaner at home, and your drain does not clear and you call a plumber and you say oh by the way i tryed this drain o stuff, a lot of them we be really careful on the way they try to clear it then, such as they will NOT use their metal drain snakes.
<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment