Tweet
did egr delete today, that is the first and last time i plan on sawing soild iron by hand. it took like an hour to saw both sides, its not pretty, but if it warps, i dont know what will hold up. the only thing i am worried about holding up is the high temp rtv. and i want to find a better way to hold the filter on.
-
did egr delete today, that is the first and last time i plan on sawing soild iron by hand. it took like an hour to saw both sides, its not pretty, but if it warps, i dont know what will hold up. the only thing i am worried about holding up is the high temp rtv. and i want to find a better way to hold the filter on.
-
Re: !EGR done
oh come on! you have to saw one more to put over the intake. :) i think its good to go, doubt it will warp.<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down. -
Re: !EGR done
why not just block off the egr-to-intake at the intake. seems like that egr is just picking up hot engine air.
regardless, it probably wont make any difference2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: !EGR done
this way he doesn't have to tune out the codes that removing the whole thing would throw. The engine air is cooler than that exhaust airOriginally posted by slow6Comment
-
Re: !EGR done
Have you noticed any loss of Gas Milage yet? I heard its ~1 mpg.?Justin<br /><a href=\"http://www.bass482.com/firebird/index.html\" target=\"_blank\"> 2000 Black Firebird A4 Y87<br /></a>170.2rwhp/203rwtq (SAE Corrected)Comment
-
Re: !EGR done
i've driven like 20 miles, so i havent really noticed anything yetOriginally posted by Bass482Comment
-
Re: !EGR done
did u get any perfromences gains out of doing this?2000 camaro rs:whisperlid, 2.5 magnaflow exhaust, catco high flow cat, fast toys cai, 3.73, 160 power stat, msd 8.5 wires ngk iridium spark plugs, hpp3, zzp w/p and alt. under drive pullies, 1.9 Rockers/LS6 Springs with ls1 retainersComment
-
Re: !EGR done
nothing real noticeable, i mainly did it to stop buildup of gunk in my intakeComment
-
Re: !EGR done
hmmm...... do u think maybe 1hp2000 camaro rs:whisperlid, 2.5 magnaflow exhaust, catco high flow cat, fast toys cai, 3.73, 160 power stat, msd 8.5 wires ngk iridium spark plugs, hpp3, zzp w/p and alt. under drive pullies, 1.9 Rockers/LS6 Springs with ls1 retainersComment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.2 weeks ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment