SES Light wring for 3.4L engine swap - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

SES Light wring for 3.4L engine swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SES Light wring for 3.4L engine swap

    I'm in the process of finishing up the wiring for the installation of a 1995 3.4L swap into my MGB. Does the PCM send a ground, or a voltage to the light?

    Therefore, should I be hooking up my new dash light to 12-volt power, or to ground?

    Thanks,
    DAL

Latest Topics

Collapse

  • Dongrossmd
    Throttle Position Sensor trouble shooting
    by Dongrossmd
    I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
    1 week ago
  • ssms5411
    New stereo
    by ssms5411
    Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
    1 week ago
  • 187shark
    Tail light issue causing problems. Please help..
    by 187shark
    Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
    3 weeks ago

FORUM SPONSORS

Collapse
Working...
X