Model Year question.

[mrbako]

<blockquote>quote:</font><hr> The returned cylinder heads MUST be from a late 1998 or newer engine and in rebuildable condition. Prior to mid-1998, GM used smaller valvespring pilot seats and the heads were prone to cracking at these locations. <hr></blockquote>

This is from Intense Racing's site...

how do i know if my 98 is a early to mid 98...or a mid to late 98?

VIN # 2G1FP22K8W2106907

[3.4 slow to go]

probably need to find the casting numbers off the heads. Since they're specifing the years acceptable, they might have a listing of the cast numbers.

[mrbako]

negative...no list, they know when they get in there...

i was hoping there was some site i could plug in my VIN # and find out when it was made. Any suggestions besides pulling the heads?

[02PewterBird]

<blockquote>quote:</font><hr>Originally posted by mrbako:
negative...no list, they know when they get in there...

i was hoping there was some site i could plug in my VIN # and find out when it was made. Any suggestions besides pulling the heads?<hr></blockquote>

There's a sticker on your driver side door. It has the month and year of manufacture.

[easyc4]

also under the front bumper, where the plastic piece is to not let anything up into teh engine bay, it tells you the month day and shift that the car was built on