Tweet
lately ive been smelling a strong smell of exhaust gases and i popp the hood and were the egr connects to the crap stock manifolds i feel a load of air rushing out idk wat i should do because im not sure if this is makin the car run bad because its very shakey and the engine compartment is very loud like overtakes the exhaust sound and i have a magnaflow cat back
-
-
Re: egr problem
try tightening it? unless its already tight.2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls! -
Re: egr problem
You can buy a gasket for the egr tube from chevy. You might have trouble trying to locate one at a parts store. They don't make one for the v6, so get the one for a z28. The z28 gasket had provisions for dual bolts where our v6 only has one, but you can trim off the the extra.69 Camaro 350 4spd, Full Hotchkis susp, Baer brakes, moser 12 bolt, Flowmaster<br /><br />96 RS Hotchkis STB, subframe connectors, Hotchkis LCA and adj Panhard rod, SS camaro sway bars, Bilstein shocks, powerslot rotors, Borla exhaust, rksport headers, k@nFIPKComment
-
Re: egr problem
ya, scrape the old gasket off with a razor blade2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment