Tweet
Hey just to let you know, i'm a little upsert i bought a crane powermax 2030 from crane and guess what it will not work for our car liek they said. If you have a 3.4 there is no division for the cam sensor (stagen this means you are actually loosing power with this cam.) I called Crane cam after i had the engine apart and they said sorry bout ya i payes 1,000 dollers for this car to have this cam put in and found otu after it won;t work.
-
My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger -
Humm, funny in that I picked up at least 2 tenths at the track after the install. Works perfectly fine in my car and the other 3.4 it was in.
And who's charging you $1000 to install a CAM? man, that's way too much.
[ March 13, 2002: Message edited by: stagen ]</p>94 Quasar Blue Z28<br /><a href=\"http://www.9t4z28.com\" target=\"_blank\">http://www.9t4z28.com</a><br /><a href=\"http://www.9t4z28.com/Dyno1.htm\" target=\"_blank\">http://www.9t4z28.com/Dyno1.htm</a> -
I could be wrong, but I believe the stock crank is a more agressive profile than the 2030.
I'm still looking into whether the 3.4HO cam in the gmpp catalog is the same as stock.1978 Formula 461 in progress of being built :rock:
2013 Ram 1500 Big Horn
former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
94 comero 3.4Comment
-
Only thing i know is we still have the problem with the cam sensorMy new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and superchargerComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...4 weeks ago
Comment