Oil pump system priming - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Oil pump system priming

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oil pump system priming

    I can't get my 2002 3.8 to register any oil pressure when cranking. I bought the engine from a junkyard, it was in such good shape I didn't open anything, they said it had under 50k on it. I'm using a remote oil filter setup from transdapt. I unscrewed the oil filter a bit and even after cranking for 30 seconds I can't get oil to flow into the fliter. I pulled the plugs to get the engine to spin quicker. Is there an external pump priming method for the L36? I shouldn't have to get into the pump and pack it with grease as it was never opened up, or rebuilt. Any tips?
    Chris<br />92 Isuzu pickup, dropping in a 3800

  • #2
    Re: Oil pump system priming

    My friend told me these oil pumps are notorious for losing prime and the way to do it is add 15 qts of oil to submerge the pump, crank, then drain the excess oil. It worked fyi if it happens to anyone here.
    Chris<br />92 Isuzu pickup, dropping in a 3800

    Comment


    • #3
      Re: Oil pump system priming

      cool. yeah i would offer sum nuggets of advice but i know nothing about that. good ya got it working again! congratulations!
      2000 3.8L Camaro A4 Pewter Y87<br />K&N Filter, SLP Ram Air kit, Eibach Pro Kit, Flowmaster 80 series, Silverstars, NGK plugs and MSD Super Conductor Wires, Electric Water Pump

      Comment


      • #4
        Re: Oil pump system priming

        i guess thats an option. I'm lucky I'm rebuilding, I can just pack all the moving parts with grease
        2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

        Comment

        Latest Topics

        Collapse

        • Andy H
          Transmission removal help!!
          by Andy H
          Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
          2 weeks ago
        • 2.8 Bird
          Abs inop
          by 2.8 Bird
          Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
          3 weeks ago
        • fishin
          Intermittent Headlight Function 97 Firebird
          by fishin
          I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
          3 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X