Tweet
its suckin air in the oil filler spout dipstict tub valve cover where pcv goes and other valve cover hole where the tube that goes the air duct . idols about 2200 rpms i can plug the valve covers holes and idols fine. thanks guys
-
-
Re: 3.4 help
so the oil fill spout is sucking air in? I would suggest replacing the PCV valve then. its only like a $3 part and is the closest vaccume part to replace.95 Firebird<br /> <a href=\"http://www.cardomain.com/memberpage/673250\" target=\"_blank\">http://www.cardomain.com/memberpage/673250</a> <br /> <a href=\"http://photobucket.com/albums/y217/andrewbrandon19/\" target=\"_blank\">http://photobucket.com/albums/y217/andrewbrandon19/</a> <br /><br />me on a good day------> <a href=\"http://communicatio.webblogg.se/images/wet_cat_113159625.jpg\" target=\"_blank\">linky</a> -
Re: 3.4 help
sucks air without pcv veven hooked up, got a new one on itComment
-
Re: 3.4 help
Your high idle RPM is from a vaccum leak.
The PCV system, through the use of manifold vaccum, is supposed to draw vapors and combustion bypass gasses into the into the intake manifold to be burned off in the combusion chambers.
If you remove the vaccum line from the PCV valve and plug the line (so that you don't have a vaccum leak), and you still have vaccum drawing from the locations/components you listed, then my guess is that the intake manifold probably has a leak on the underside (in the lifter valley area) which is providing an unwanted vaccum in the interior of the engine, causing the symptoms that you describe.
Do you have any other driveability issues, like hesitations, surges, oil consumption??Now Playing: \'99 Pewter Firebird, stock, bone stock, and nothing but stock, so help me God!<br />Comming attractions: K&N Filter, Lid Mod, Intake Bellows Smooth Pipe Mod.<br />I dream about: Forced Induction (TC or SC) or NOX (or both!)Comment
-
Re: 3.4 help
valves rattle a bit under a load a tad, using lot of oil thank you verry much buddy,Comment
-
Had to be evacuated Monday again after a fire was going on the hill behind us. Only 3-4 hours, they did a good job getting it under control. Especially...1 day ago -
Up for sale is my 2001 Chevrolet Camaro 3.8 in need of some TLC and help. I’ve owned this vehicle the past 18 years (since 2006) and it’s been very...2 weeks ago -
So went out to start the Camaro and no start, batteries are good just hear a thud sound, started up fine last Friday. Check the fuses and the battery...3 weeks ago
-
Working on getting my 99 Camaro back in action. Long story short, got parked in the garage about 5 years ago (kids, career stuff ect.) trying to get her...3 weeks ago -
I have a 15 year boy now (crazy how time flies from when I was a teenager on here!) and his first car will be the old Camaro.
I stopped driving...3 weeks ago
Comment