Roller Rockers for the 3.4

[z28quetzal]

Guys,

I have a 3.4 from a '95 Camaro (early production) and I installed that engine in a Triumph TR6. I am using the T5 tranny that came with it and have about 1200 miles on the conversion. The engine has about 50k miles - documented.

My question is this: I want to get some roller rockers for it. I have tried Summit, Jegs, etc and everyone tells me a different story as to what kind of roller rockers to get. Get the ones with or without the 'guards' and so forth.

Can somebody please tell me what it is that I need to get? I am sure somebody here has roller rockers on their 3.4.

thanks!

[rt1]

Re: Roller Rockers for the 3.4

I have the roller tiped rockers on my 3.4L. They're not the true roller rockers, they are stamped steal with the roller tip. They are from Comp and came with the cam kit... I'll go and check what part # they are. BRB.

Rob

[rt1]

Re: Roller Rockers for the 3.4

I did buy the kit from Summit. The part # from Comp is 1413-12. Here is the .pdf of the chart that it's on... http://www.compcams.com/technical/Ca...12-117_226.pdf
Check out the top of page 4. Your gonna be looking for the "173-207ci (2.8L-3.4L) 60° 6 cyl 1979-1994". Hope this helps.

Rob

[3.4 slow to go]

Re: Roller Rockers for the 3.4

tvr paul, right????

http://www.cranecams.com/?show=brows...umber=25750-12

http://store.summitracing.com/egnsea...078+309474+115

http://www.jegs.com/webapp/wcs/store...hItemId=116003

[z28quetzal]

Re: Roller Rockers for the 3.4

Thank you very much for the info!