Tweet
help!!!!!
This it is bird of fire from the our v6 firebird site. I just got the Alternator Underdrive Pulley and i do not know how to get off the stock Alternator Pulley . If you can help that would be great.
-
-
Re: help!!!!!
The only time I changed an altenator pulley I had the auto parts store do it for me as I do not have any air impact tools.95 Red Camaro 3.4L V6 A4 -
Re: help!!!!!
Did you get it used? If its new it should have directions.
You need something to hold the shaft steady while you loosen the nut. (man thats raunchy) Something like an allen wrench while you loosen the nut.Comment
-
Re: help!!!!!
I got it new from zzp and that is it no papers on it or any thing. If I put the stock pulley in a vice. Do you think a can get it off with a brekler bar? What auto part store will do the pulley change.Last edited by bird of fire; 07-28-2006, 05:00 PM.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment