Is it ok to use high pressure black moly when installing injectors? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Is it ok to use high pressure black moly when installing injectors?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Is it ok to use high pressure black moly when installing injectors?

    This is what my buddy made me use [img]smile.gif[/img] he said it is better than oil and will help with not messing up the o rings, will this stuff hurt anything?
    Longtubes, true duals, ram air, caspers tps tec, ls1 26lb injectors, supersix powerpack, heads milled .020, comp cam .507 220/224 114 ls, forged internals and chromeoly pushrods, bored .030 over, tb spacer, tranny built with stiffer springs and kevlar bands, bigger servo, transgo stage 3 shift kit, edge 3600 stall, 1 pc aluminum ds, 3.73 superior gears, lsd rear ,custom pcm tuning, walbro 255 in tank,

Latest Topics

Collapse

  • Dongrossmd
    Throttle Position Sensor trouble shooting
    by Dongrossmd
    I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
    1 week ago
  • ssms5411
    New stereo
    by ssms5411
    Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
    2 weeks ago
  • 187shark
    Tail light issue causing problems. Please help..
    by 187shark
    Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
    4 weeks ago

FORUM SPONSORS

Collapse
Working...
X