Tweet
I posted on here a week or so ago about how I was going to change my oil but I didnt know if my car would go on ramps. Well, I can't even get the ramp to touch the front tires because it hits the front bumper. Everyone here told me it would go fine as long as I went slow. Someone told me to put some boards down to lessen the steepness of the grade so I tried that and the boards snapped like twigs and yes I had something supporting them. I really need to change my oil and I want to do it myself...what do I go?
-
1998 Camaro V6 \"Black Mamba\"<br />Y87<br />Whisper Lid w/ K&N filter<br />Flowmaster American Thunder<br />Numerous appearance mods.<br /> <a href=\"http://www.cardomain.com/ride/2154172\" target=\"_blank\">Car Domain</a> -
I believe he meant set the board flat on the cement, not angled on the ramp.
The smallest rhino ramps (plastic ones) people say work.
SO your options are try the boards the right way, buy the rhino ramps, or just a jack and jack stands.\'96 A4 Camaro 3800<br />Nothing but... <br />Flowmaster 40 series -
I dont know if I can trust plastic ramps...I guess it's jack stands for me.
Where is the drain bolt located on the 3.4? Maybe I can get to it by backing the car on some ramps.
[ July 23, 2005, 01:09 PM: Message edited by: Greg94Red392 ]1998 Camaro V6 \"Black Mamba\"<br />Y87<br />Whisper Lid w/ K&N filter<br />Flowmaster American Thunder<br />Numerous appearance mods.<br /> <a href=\"http://www.cardomain.com/ride/2154172\" target=\"_blank\">Car Domain</a>Comment
-
The ramps support vechicals up to 8,000 lbs. and have 17 inch clearance. I would highly recommend them. They are alot safer than jack stands, and alot easier.\'96 A4 Camaro 3800<br />Nothing but... <br />Flowmaster 40 seriesComment
-
Wow I finally got it up on the ramps. Now...where is that drain bolt...1998 Camaro V6 \"Black Mamba\"<br />Y87<br />Whisper Lid w/ K&N filter<br />Flowmaster American Thunder<br />Numerous appearance mods.<br /> <a href=\"http://www.cardomain.com/ride/2154172\" target=\"_blank\">Car Domain</a>Comment
-
you guys are probibly gonna flame the hell out of me for this, but i found this link looking for things for my dad's mustang.
http://www.mustangworld.com/ourpics/...amps/index.htm
but its still a good ideaComment
-
And why would we flame the hell out of you? Because there's a Mustang on the ramps?
1998 M5 3.8 Mystic Teal Camaro<br />Flowmaster exhaust, Pacesetter headers, 3\" cat, 3\" S-pipe, whisper lid, ram air, Spec Stage 1 clutch, Poly Trans mount, Walbro 255LPH. Numerous appearance mods.<br /><br /> <a href=\"http://www.cardomain.com/ride/2130533\" target=\"_blank\">http://www.cardomain.com/ride/2130533</a>Comment
-
i goy the plastic ones. The only thing is if you dont stop exactly on top and go a little further it will twist the plastic and bend it, but when you back off it fixes. They actually had a higher weight limit and everyone recommended them because they are easier to use by yourself.
Also, i am a big guy and dont want to chance getting squished, so i do cinder blocks AND jackstands where i am working with the ramps. I can never be too safe.97 RS<br />Member Status: F-Body Owner<br />Member Number: 7705<br />Registered: September 13, 2005<br />Posts: 24<br />Email Address: hfoxx123@yahoo.com<br />Location: Minnesota<br />Occupation: Database Administration<br />Homepage: <a href=\"http://none\" target=\"_blank\">http://none</a><br />Car: uh a camaroComment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...4 weeks ago
Comment