Okay, my 2000 A4 Camaro is having some electrical problems and my damn GM dealer is trying to rip me a new ****. First I was having a really bad rough idle; the car would nearly drop to 500RPM give or take and was throwing a misfire code. So I cleaned the throttle body and cleared the code and everything worked okay for about a week. Then the rough idle slowly came back until the car was getting close to stall RPMs and I threw the same misfire code again. So this time I took it to the dealer just to see what was up since I really haven't had much time to work on it. They cleared the code and said everything seemed fine and two weeks later the damn rough idle was back and my voltage gauge was randomly dropping below 11 (however the lights weren't dimming).
So this time I went back to the dealer and gave them hell. They looked at it more in-depth, I suppose, and they tell me that the reason for my voltage drop was because my alternator was going and the rough idle was because of my plugs and wires. I have been running on ngk's and msd wires for the past 3 years and had no problems. They quoted me 550 for changing the alternator and 600 for changing just the PLUGS and WIRES which is friggen crazy. Anyways, I was going to be out of town and figured have them at least change the alternator while the car was there. I shouldn't of shelled out the $$$ for them to do it but oh well, too late now. However, I wasn't going to spend 600 to just have them change my plugs and wires so those I did myself in no time. Was a b**** with my Pacesetters but just took patience.
First I tried Bosch Platinum +4 with my original MSD wires to see what would happen and it fixed the rough idle but during acceleration the car would bog and stutter so I figured what the hell and go with Accel wires and new NGK's and that fixed the rough idle thank god. However, my damn electrical system is still randomly dropping/fluctuating and my oil pressure randomly fluctuates now. But, with the gauges fluctuating I really don't feel much of anything running different w/ the engine nor do my lights dim.
For reference sake, my battery (Optima Yellow Top) is only 2 years old and gets perfect voltage while the cars off and on. I also checked all my coils and they seem fine. I've gone through my Chilton's and the forum and well I'm pretty much lost at this point. Could it just possibly be my gauge cluster or what, any ideas or info would be very much helpful at this point???
So this time I went back to the dealer and gave them hell. They looked at it more in-depth, I suppose, and they tell me that the reason for my voltage drop was because my alternator was going and the rough idle was because of my plugs and wires. I have been running on ngk's and msd wires for the past 3 years and had no problems. They quoted me 550 for changing the alternator and 600 for changing just the PLUGS and WIRES which is friggen crazy. Anyways, I was going to be out of town and figured have them at least change the alternator while the car was there. I shouldn't of shelled out the $$$ for them to do it but oh well, too late now. However, I wasn't going to spend 600 to just have them change my plugs and wires so those I did myself in no time. Was a b**** with my Pacesetters but just took patience.
First I tried Bosch Platinum +4 with my original MSD wires to see what would happen and it fixed the rough idle but during acceleration the car would bog and stutter so I figured what the hell and go with Accel wires and new NGK's and that fixed the rough idle thank god. However, my damn electrical system is still randomly dropping/fluctuating and my oil pressure randomly fluctuates now. But, with the gauges fluctuating I really don't feel much of anything running different w/ the engine nor do my lights dim.
For reference sake, my battery (Optima Yellow Top) is only 2 years old and gets perfect voltage while the cars off and on. I also checked all my coils and they seem fine. I've gone through my Chilton's and the forum and well I'm pretty much lost at this point. Could it just possibly be my gauge cluster or what, any ideas or info would be very much helpful at this point???
Comment