LS1 Conversion people inside - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

LS1 Conversion people inside

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • LS1 Conversion people inside

    I have worked a deal with HPSalvage on a LS1 Engine and tranny with all the needed parts ex. crossmember and computer blah blah blah. I got a good deal on it but am wondering how it wears on a pre 98 F-body. I was wondering if anyone in here has done the conversion and if so could they E-mail me so I can ask a few questions. I am trying to contact whoever did the conversion on their 95 trans-am on HPSalvages site but they could not give me any info on him/her. Any help would be appreciated thanks. P.S. I will be FULLY documenting the project as much as I can but I am not starting it till march as I am in Minot AFB, ND and well winters here are like the jack frost cartoon. [img]smile.gif[/img]
    James Stephens<br />Computer Network Manager<br /><br />Wings West GFX, RK Sport Spoiler, SS Custom Fiberglass Hood, Raven exhaust, Catz Headlight conversion, eibach pro kit, etc.<a href=\"http://www.angelfire.com/hi2/pimpjames\" target=\"_blank\">My car and my website :)</a> MY Car Domain Site &#0124;&#0124;

  • #2
    There is a guy in my local F-body club who has put an LS1 in his '94 Z28. The engine fits with little modification contrary to popular belief. And no the engine does not sit to tall for the early fourth-gen front end......some people will try to tell you that BS.

    It will require slightly more modification to slip into a V6 car but shouldn't be much harder. I have a link to a website that sells all the conversion parts for the swap. There sponsor vehicle is a black '95 3.4L Camaro and they have installed an LS1 and have custom fabricated 32v Cadillac Northstar heads onto it! :eek:

    If I can find it, I'll post it for ya.
    1997 Camaro,<br />SLP cold-air, Hooker Supercompetition catback, Air temp. module, Powerstat thermo, 1LE Aluminum drive shaft, 3.42 POSI rear, 1LE sway bars front & rear, Powerstop crossdrilled rotors on all corners, Torque Thrust II\'s (17x9.5 front & 17x11 rear), and a couple other goodies. <a href=\"http://www.villagephotos.com/pubbrowse.asp?selected=84487\" target=\"_blank\">http://www.villagephotos.com/pubbrowse.asp?selected=84487</a>

    Comment


    • #3
      THanks that would be great funny the 95 black is the same as mine ha ha.
      James Stephens<br />Computer Network Manager<br /><br />Wings West GFX, RK Sport Spoiler, SS Custom Fiberglass Hood, Raven exhaust, Catz Headlight conversion, eibach pro kit, etc.<a href=\"http://www.angelfire.com/hi2/pimpjames\" target=\"_blank\">My car and my website :)</a> MY Car Domain Site &#0124;&#0124;

      Comment


      • #4
        ProjectX what do you do at the base? My uncle works there and he does something with plumbing and carpentry stuff. His name is Tim Bamburg, do you know him? I think his rank is something like Master Sergent (could be the rank right under dont really know) But anyways sorry for the off subject post.

        Gerry
        <b>2001 Black Trans AM M6</b> <br />!Hood baffles,!CAGS,Mufflex Cat-bypass pipes,Borla y-pipe,TSP Rumbler cat-back,LGM lid,G2 springs,BMR SFC\'s,BMR STB,LGM billet pedals,Lou\'s short stick,Custom FRC\'s,Custom hood and side vents,Polished 18x9.5 Z06 wheels

        Comment


        • #5
          Limited E- worked out a deal for $2500 with pretty much everything.


          Beastly TA- that's funny another one in the cold up here huh

          [img]smile.gif[/img] I work at the NCC(network control center) we do the E-mail, internet, and tons of other computer related taks. It is in the Communications squadron. he has probably seen my car around but his name sounds familiar.
          James Stephens<br />Computer Network Manager<br /><br />Wings West GFX, RK Sport Spoiler, SS Custom Fiberglass Hood, Raven exhaust, Catz Headlight conversion, eibach pro kit, etc.<a href=\"http://www.angelfire.com/hi2/pimpjames\" target=\"_blank\">My car and my website :)</a> MY Car Domain Site &#0124;&#0124;

          Comment


          • #6
            <blockquote>quote:</font><hr>Originally posted by ProjectX:
            I have worked a deal with HPSalvage on a LS1 Engine and tranny with all the needed parts ex. crossmember and computer blah blah blah. I got a good deal on it but am wondering how it wears on a pre 98 F-body. I was wondering if anyone in here has done the conversion and if so could they E-mail me so I can ask a few questions. I am trying to contact whoever did the conversion on their 95 trans-am on HPSalvages site but they could not give me any info on him/her. Any help would be appreciated thanks. P.S. I will be FULLY documenting the project as much as I can but I am not starting it till march as I am in Minot AFB, ND and well winters here are like the jack frost cartoon. [img]smile.gif[/img] <hr></blockquote>


            You might want to talk with Scott at www.speedautomotive.com . They sell the parts also, and have done these conversions.


            http://www.camarov6.com/cgi-bin/ulti...&f=16&t=000894

            [ December 16, 2002: Message edited by: FirebirdGT ]</p>
            Robert - owner www.FirebirdV6.com/CamaroV6.com

            "Mid-life crisis? I'm way beyond that!"

            1996 Black Firebird GTxxxRam Air V6 w/ M5xxxwww.FirebirdGT.com

            Raven

            Comment


            • #7
              Wow,

              Not a bad site thanx firebird
              James Stephens<br />Computer Network Manager<br /><br />Wings West GFX, RK Sport Spoiler, SS Custom Fiberglass Hood, Raven exhaust, Catz Headlight conversion, eibach pro kit, etc.<a href=\"http://www.angelfire.com/hi2/pimpjames\" target=\"_blank\">My car and my website :)</a> MY Car Domain Site &#0124;&#0124;

              Comment

              Latest Topics

              Collapse

              There are no results that meet this criteria.

              FORUM SPONSORS

              Collapse
              Working...
              X