Replacing Camshaft Sensor

[defrag]

I was driving home the other day and all of the sudden my car started kirking out. It felt like a horrible misfire but it didnt throw a misfire code, inside it shot out a P0341 (Camshaft Sensor)

I went to DAP and ordered a new sensor, Im just wondering how complicated or... how easy of a replacement this is? I looked at the diagram and it seemed fairly straightfoward.

Has anyone done this fix and could give me some tips or lead me in the right direction?

Thanks

[98Camaro3.8]

Unbolt, remove, install, torque to 44 in lbs, done.

[defrag]

cool, so i can unbolt it from the top of the engine right? no need for a jack or nothing. i might just do it on the way to work if thats all it takes thanks alot!

[98Camaro3.8]

#5 here.

Should be pretty easy to get to. ;)

[defrag]

Well that was an easy fix. However... now the Camshaft sensor code is gone but in its place is a random misfire code! yay!

i just changed the spark plugs, wires, and coil packs less than 2 months ago.

anything else i should look for? it feels exactly the same as before i replaced the sensor only diffrence is... no sensor error code.

[ July 27, 2005, 07:01 PM: Message edited by: defrag ]

[therock]

im getting the same code brand new engine they put a new one on ut it doesnt help they now belive that the ocde is being triggered by the pcm