Y-pipe bolts screwed

[slow6]

I been having exhaust leaks, so my wideband sensor isnt being accurate.
I was trying to put the y-pipe back on right because I thought it was kinda overlapping with the header on one side. On my passenger side header I could only get one of the bolts half way through the other would go all the way in. I used a electrical impact gun and it still wouldnt go further in. I tried it on the one that went all the way in fine and it broke the bolt off.
So now I have to drill it out.

Anyone know where I can find a new y-pipe bolt?
thanks

[slow6]

Re: Y-pipe bolts screwed

p.s. I got a new oil psi sensor and my oil pressure is reading like 60-70psi!
I think it went from 30 -> 65 because I fixed my rear main leak.

[Mrriverajr]

Re: Y-pipe bolts screwed

Did you ever find the bolts, I need them also. Just got an exhaust leak also.

[slow6]

Re: Y-pipe bolts screwed

i think my friend is gonna send an old rusty one
i'm sure you can get one from the stealership

[Turbo V6 Camaro]

Re: Y-pipe bolts screwed

take a botl to lowes or home depto and get a one in the same length

just make sure it is grade 8 will cost like $5 for 4 bolts and nuts/washers

[slow6]

Re: Y-pipe bolts screwed

which would you prefer:
to go to the dealership? $3.50 for 1
or go to a hardware store?

[CDNFB]

Re: Y-pipe bolts screwed

I got a new oil psi sensor and my oil pressure is reading like 60-70psi!
I think it went from 30 -> 65 because I fixed my rear main leak

Great to hear your oil woes are solved!

Man, that must have been one h.e.l.l. of a leak to affect pressure like that. Your sure it wasn't the new sender?

[Turbo V6 Camaro]

Re: Y-pipe bolts screwed

which would you prefer:
to go to the dealership? $3.50 for 1
or go to a hardware store?

store

[slow6]

Re: Y-pipe bolts screwed

Great to hear your oil woes are solved!

Man, that must have been one h.e.l.l. of a leak to affect pressure like that. Your sure it wasn't the new sender?

Theres no way to tell with these dummy "gages" :(