Tweet
i just cant figure this out... Im about to take down the gas tank and checking the gas pump its self.... As far as that valve i already checked that .... Nothin is coming out.... PLease I need some help... I dont want to do extra stuff.... if you this eny relays or enything might be burnt?
-
-
huh?2000 NBM M6 Camaro Z28<br />323/335 -
#2. I dunno... :rolleyes:Thanks, <br />JAM<p>02 Firebird GTComment
-
umm.. you can check fuses..
or just have someone sit on the ground behind the car and turn the key to the on position.. and let em listen to see if they hear the pump kick on..
not really any relays to check as I don't think the pump uses enough electricty to justify a relay though I'm not 100% sure on that one..-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:Comment
-
Test the fuel pressure to the fuel rail. Hook up a fuel pressure tester to the valve on the rail. It'll have a black cap on it. Also with a test light, test to make sure you are getting power to the pump. If you need wiring diagrams, wire colors, or advice, let me know. I am a Tech for a Pontiac dealership and can e-mail you some info.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment