Abit to spend

[97rs4life]

Re: Abit to spend

you are gonna need more than that done, sorry to tell ya that.

[UDLOSE98]

Re: Abit to spend

He says I only need to get my valve pedestals milled down some. How hard would that be, or how much would it cost? My uncle's a mechanic, so he'd most likely do it all for me if I asked him to. How much gain do you think I'd see from that?

EDIT: Nvm, did some readin on it, and I don't want it afterall. So, I may be interested in your DS. I would really like to find a LSD and gears though. How much of a difference would I see form the DS? I know it won't be much, but just an estimate.

consistent .2 drops in quarter mile.

[97rs4life]

Re: Abit to spend

yup, .2 drop in the 1/4 is what I saw

[RadRacer]

Re: Abit to spend

EDIT 2: Did some more searching (I'm a good boy :P ) and foudn that there's about an average of .2 coming off of 1/4 times with a aluminum shaft. So, all I can say is I think you should hold that one for me man. I should hopefully have the money by either tomorrow or Wednesday (depends on if I have time to get to the bank tomorrow).

Guess I shoulda refreshed before I edited again. Thanks guys.

[97rs4life]

Re: Abit to spend

lol, yea you keep editing and the replies are there, lol

[UDLOSE98]

Re: Abit to spend

definetly, it is nesstled away safe at my house, right next to the torn apart car.

[logan13883]

Re: Abit to spend

Is the DS one peice? if he doesnt want it , i might take it , just saying if hes not interested

[UDLOSE98]

Re: Abit to spend

its a 1 piece, alumin, yep.

[RadRacer]

Re: Abit to spend

Hey man. I was getting the money from my cuz, but he doesn't get paid until Fri, I thought it was Tues. So, by Fri I'll have the money, is that OK?

[RadRacer]

Re: Abit to spend

if I bought a used LSD and gears out of another F-body, what do I need to install it? Can I just put it in and be done with it, or do I need to buy an install kit and all? I want the DS, but someone is selling gears and a LSD, and I'd rather have them than the DS, sorry bout that. But, if I need to buy other stuff and the gears and LSD are too much, I'm still interested in teh DS. I've got the money, just got to get it into the bank tomorrow.

[slow6]

Re: Abit to spend

If you take out the whole rear end... with gears and LSD already installed...
its a direct replacement.

If you remove the gears/ lsd out of a rear end..
then you have to have a shop setup the gears within tight specification
($200-$300) plus the cost of an install kit and oil

[RadRacer]

Re: Abit to spend

If you take out the whole rear end... with gears and LSD already installed...
its a direct replacement.

If you remove the gears/ lsd out of a rear end..
then you have to have a shop setup the gears within tight specification
($200-$300) plus the cost of an install kit and oil

OK, thanks

[notsonic]

Re: Abit to spend

ill take that driveshaft if no one else does. :)


did you do any suspension work? all that powers worthless if you gotta break to a stop before taking a turn ;)

shocks and springs are something to look into later on. but upgrading your front sway bar is a nice handling improvment. and you could do a 32mm bar for less than $100.

[RadRacer]

Re: Abit to spend

ill take that driveshaft if no one else does. :)


did you do any suspension work? all that powers worthless if you gotta break to a stop before taking a turn ;)

shocks and springs are something to look into later on. but upgrading your front sway bar is a nice handling improvment. and you could do a 32mm bar for less than $100.

I'm just looking for power for the track right now.

[RadRacer]

Re: Abit to spend

Hey, I guess someone else can have the DS. I've got the money and was about to ask your PayPal, and my mom walks in and says I don't need it. She'll let me get stripes, rims, subs, etc etc, but not a lousy DriveShaft. Sorry man, but there are 2 others who said they wanted it.