Tweet
i would not think a copper plug would use the same gap as a iridium or however its spelled. wasn't ther a sticky with all this info once?
What to gap my plugs at?
What to gap my plugs at?
-
-
Re: Gap for NGK TRR55?
Stock gap is .060 I just replaced mine with coppers and put it around .055 and it runs like a dreamLet's flip a coin. Heads I get tail, Tails I get head. -
Re: Gap for NGK TRR55?
What brand did you use?
Are the NGKs better then the Stock ones?Comment
-
Re: Gap for NGK TRR55?
I used some autolites. I was broke as hell and the misfire was so bad it was undriveable so I just got some basic autolites, 1.50 each, to get it going. Wanted ngk and msd stuff but not this month.Let's flip a coin. Heads I get tail, Tails I get head.Comment
-
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment