pleaese someone help please! : ( - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

pleaese someone help please! : (

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: pleaese someone help please! : (

    Originally posted by BLLDOGG
    Pull the plugs


    just curious, did you funnel it into the hose of the actual booster?

    yea i funneled it into the brake booster **** im screwed i tried to turn it over before and its a little better then nothing it cranked a few times i think the seafoam is evaporating out i guess idk but im gunna pull the plugs i have a warranty thank god on all internals i didnt know seafoam could hydrolock an engine thats ridiculous i didnt even funnel 1/3 of the can in? but to let everyone know its a 98 camaro if anyone has any info that would be great

    Comment


    • #17
      Re: pleaese someone help please! : (

      doode you need to quit trying to turn that **** over if you did hydrolock that **** and you keep tryin to turn it over you can bend some **** like you um i dunno.... connecting rods..or valves.. or even brake your timing chain so stop pull the plugs crank it over and see if anything comes out of the hole other wise get that **** towed to a good shop and get it looked at if you dont know what your doing... oh and a tip for the future if you dont know ask and find out first or just dont do it cause that **** can get expensive you know

      Comment


      • #18
        Re: pleaese someone help please! : (

        Pull the plugs, crank it a few times... let the seafoam dry/evaporate overnight... i'd say try it after that, but i'm no pro... I seafoamed yesterday and my only problem was after i choked the engine off, it shot the seafoam in the brake line back out and into my eyes. yea u definitely should wait a long time to start that puppy up.

        Comment


        • #19
          Re: pleaese someone help please! : (

          I dont know if I would feel comfortable letting seafoam choke / killl my engine
          2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

          Comment


          • #20
            Re: pleaese someone help please! : (

            u have to. if u pour it in with the engine off, it doesnt go anywhere, or it hydrolocks like the originator of this thread. if u pour it in slow and it doesnt kill it, it gets burnt up right away/before it can soak into and break up the carbon buildup.

            Comment


            • #21
              Re: pleaese someone help please! : (

              a warrenty wont help you when you caused the problem. I hope for you they don't send out an adjuster and the tech doesnt say anything. doubtful thouhg on the adjuster thing
              2000 3.8 A4 Pewter Camaro

              Comment


              • #22
                Re: pleaese someone help please! : (

                i let the car sit over night and i started it in the morning and it took a little bit and it was running fine idle smooth and all but then i shut it off and went to start it and it was just dead again and when i tried to turn it over it just clunked real loud again..so im going to get it towed to a shop tomorro morning hopefully the warranty will cover the engine internal that broke...i really just want to drive this car off a bridge its been nothing but a problem since i bought it..

                Comment


                • #23
                  Re: pleaese someone help please! : (

                  Im not sure something broke in the engine if it ran fine. are your describing the loud click of the starter?
                  2000 3.8 A4 Pewter Camaro

                  Comment


                  • #24
                    Re: pleaese someone help please! : (

                    sounds like you might just have a bad starter

                    Comment


                    • #25
                      Re: pleaese someone help please! : (

                      don'tt tell the shop anything about the seafoam

                      ' it just started doing this crap yesterday for somereasson......."
                      1978 Formula 461 in progress of being built :rock:
                      2013 Ram 1500 Big Horn

                      former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
                      94 comero 3.4

                      Comment


                      • #26
                        Re: pleaese someone help please! : (

                        man that sucks i hope it all works out for you!
                        2001 Camaro 3.8 A4
                        1991 3000GT VR4
                        2001 Mitsubishi Eclipse GS

                        Comment


                        • #27
                          Re: pleaese someone help please! : (

                          yeaa im not going to tell the shop...thanks alot guys hopefully i get the car fixed this week its on the flat bed rite now leaving :(

                          Comment


                          • #28
                            Re: pleaese someone help please! : (

                            the shop called today they got the car running ...they said that the car idles and runs fine...the starter went thats what was causing the noise so im pretty happy

                            Comment


                            • #29
                              Re: pleaese someone help please! : (

                              LMAO, funny how it went out at the scaryest possable time. Oh and by the way, if your upper end needs cleaning, take the **** appart and clean it. Ive tryed every cleaner they make experimenting to see if any worked, non of them did ****. People think seafoams works cause it causes temporty smoke. Well, i can pour diesel, wd40, break cleaner or transmission fluid down a vacuum line and make smoke too, diesel would probly clean the best anyways..lol. Trust me, your wasting your money buying that stuff.
                              <a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.

                              Comment


                              • #30
                                Re: pleaese someone help please! : (

                                haha i know man im going to get that **** apart as soon as i get it back.. is it easy to replace the starter because i dont think it can be that hard and im not paying a shop to do something i can do myself

                                Comment

                                Latest Topics

                                Collapse

                                There are no results that meet this criteria.

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X