Tweet
My oil pan is rusting out and i plan on getting a new one soon. How hard is it to replace? What do i have to do to put it in like what things do i have to take out as in transmission or whatever??
-
-
Re: Oil Pan
Do you have a haynes or chilton's manual? If not, buy one, read it,
then ask questions.
And no I'm pretty sure the tranny doesnt have to come out. -
-
Re: Oil Pan
Try cleaning it and polishing it?
just a thought.
'95 3.8L A4 PGM. & '95 LT1 M6 PGM. :burn:Comment
-
Re: Oil Pan
Where do i buy one?Originally posted by caspernicusComment
-
-
Re: Oil Pan
Do they make em like special for Camaros or is it for like a variety of cars kind of book?Originally posted by BLLDOGGComment
-
-
Re: Oil Pan
Yea i was gonna do that im just interested in how to get it off mostly:)Originally posted by gugdathug3Comment
-
Re: Oil Pan
your post was almost right, you just left out the part about repainting it... to protect itOriginally posted by gugdathug3
There are rust cleaner kits
I would clean all the rust off and spray paint over it really good2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: Oil Pan
Nah i meannn like getting the actual oil pan offOriginally posted by slow6Comment
-
Re: Oil Pan
ya, i know you wanna change it out (hard to do)
but im saying you can just easily repair it real quick
but, its a critical component so if you insist on swapping it out, go for it2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: Oil Pan
haha im not insisting on swapping it out i just wanna polish it in paint it but im most critical about how to get it off like what other components i have to take out to get that oil pan offff Thanx for the helpComment
-
Re: Oil Pan
i wouldnt take it off just to paint it, unless there was a area you couldnt get to.
Youre gonna have to have an engine lift i believe. its alot of work, but i havent done it before2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: Oil Pan
how did you manage to rust your oil pan out??? Oh and its lots of work, i had to remove my tranny also.<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.Comment
-
Had to be evacuated Monday again after a fire was going on the hill behind us. Only 3-4 hours, they did a good job getting it under control. Especially...22 hours ago -
Up for sale is my 2001 Chevrolet Camaro 3.8 in need of some TLC and help. I’ve owned this vehicle the past 18 years (since 2006) and it’s been very...2 weeks ago -
So went out to start the Camaro and no start, batteries are good just hear a thud sound, started up fine last Friday. Check the fuses and the battery...2 weeks ago
-
Working on getting my 99 Camaro back in action. Long story short, got parked in the garage about 5 years ago (kids, career stuff ect.) trying to get her...3 weeks ago -
I have a 15 year boy now (crazy how time flies from when I was a teenager on here!) and his first car will be the old Camaro.
I stopped driving...3 weeks ago
Comment