Tweet
My oil pan is rusting out and i plan on getting a new one soon. How hard is it to replace? What do i have to do to put it in like what things do i have to take out as in transmission or whatever??
-
-
Re: Oil Pan
Do you have a haynes or chilton's manual? If not, buy one, read it,
then ask questions.
And no I'm pretty sure the tranny doesnt have to come out. -
-
Re: Oil Pan
Try cleaning it and polishing it?
just a thought.
'95 3.8L A4 PGM. & '95 LT1 M6 PGM. :burn:Comment
-
Re: Oil Pan
Where do i buy one?Originally posted by caspernicusComment
-
-
Re: Oil Pan
Do they make em like special for Camaros or is it for like a variety of cars kind of book?Originally posted by BLLDOGGComment
-
-
Re: Oil Pan
Yea i was gonna do that im just interested in how to get it off mostly:)Originally posted by gugdathug3Comment
-
Re: Oil Pan
your post was almost right, you just left out the part about repainting it... to protect itOriginally posted by gugdathug3
There are rust cleaner kits
I would clean all the rust off and spray paint over it really good2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: Oil Pan
Nah i meannn like getting the actual oil pan offOriginally posted by slow6Comment
-
Re: Oil Pan
ya, i know you wanna change it out (hard to do)
but im saying you can just easily repair it real quick
but, its a critical component so if you insist on swapping it out, go for it2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: Oil Pan
haha im not insisting on swapping it out i just wanna polish it in paint it but im most critical about how to get it off like what other components i have to take out to get that oil pan offff Thanx for the helpComment
-
Re: Oil Pan
i wouldnt take it off just to paint it, unless there was a area you couldnt get to.
Youre gonna have to have an engine lift i believe. its alot of work, but i havent done it before2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!Comment
-
Re: Oil Pan
how did you manage to rust your oil pan out??? Oh and its lots of work, i had to remove my tranny also.<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment