Tweet
I just finished replacing the intake plenum gasket on my 20002 camaro, but Im having trouble getting the injectors to go back in! does anyone have any advice?
-
-
Re: Fuel injector problems! PLease help!
20002 camaro, pics?
jk
ahmmmm the rail should slide right over the intake, cant imagine what the hold up would be -
Re: Fuel injector problems! PLease help!
I have the injectors over the intake, I just cant get them to plug back into the holes on the engine where they are supposed to go back in.
I'll try to post some pics sometime soon I just havent had time.Comment
-
Re: Fuel injector problems! PLease help!
did they slide on the rail when you had it off? They should sit right back inComment
-
Re: Fuel injector problems! PLease help!
I'm just going to try to replace the o-rings and see if that will work. Thanks for the help.Comment
-
Re: Fuel injector problems! PLease help!
lightly grease the o rings, and bottom of injectors, then they will slip right in. i had the same problem.<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.Comment
-
Re: Fuel injector problems! PLease help!
Thanks for the advice. I may also try to let them soak in gasoline for awhile.Comment
-
Re: Fuel injector problems! PLease help!
You could use gasoline, but it would be better (and safer) if you use vaseline (petroleum jelly). vaseline will not affect the rubber o-ring, and will not foul up the injector (if you use too much and it gets all over the place) cause it can readily be disolved by gas.Now Playing: \'99 Pewter Firebird, stock, bone stock, and nothing but stock, so help me God!<br />Comming attractions: K&N Filter, Lid Mod, Intake Bellows Smooth Pipe Mod.<br />I dream about: Forced Induction (TC or SC) or NOX (or both!)Comment
-
Re: Fuel injector problems! PLease help!
what part of texas you in?<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.Comment
-
Re: Fuel injector problems! PLease help!
I'm from ther Sherman area about an hour north of Dallas.Comment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 days ago -
Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...5 days ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.1 week ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...1 week ago
Comment