blinker problem. - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

blinker problem.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • blinker problem.

    hey.

    how do i get the marker covers off on a 1996 camaro? im trying to change the signal lights, and i cant seem to figure out how to get the bumper lens off...if someone could let me know it would be greatly appreciated....thanks
    1996 Chevrolet Camaro V6 3.8 M5 - Teal Green<br />SLP Cold Air Induction<br />Flowmaster Exhaust System CAT Back.<br />Website: <a href=\"http://jeffreybrey.tripod.com/camaro\" target=\"_blank\">http://jeffreybrey.tripod.com/camaro</a>

  • #2
    You have to go under the front of the car and remove some of the black plastic panels. Once they are out of the way, you need to reach up behind the bumper and remove the bulbs and then lossen the turn signal housing and pull it out from back there.
    advice: Once you have the new lenses in, replace ALL of the turn signal bulbs! Doesn't matter if you need them or not. Better to put new ones in than get back under there again, and tear everything apart for one stinkin' bulb.

    -Marc
    sigpic

    Comment


    • #3
      mark.

      i changed them today along with the new clear lenses...thanks alot...the advice was perfect! thanks again
      1996 Chevrolet Camaro V6 3.8 M5 - Teal Green<br />SLP Cold Air Induction<br />Flowmaster Exhaust System CAT Back.<br />Website: <a href=\"http://jeffreybrey.tripod.com/camaro\" target=\"_blank\">http://jeffreybrey.tripod.com/camaro</a>

      Comment

      Latest Topics

      Collapse

      • Dongrossmd
        Throttle Position Sensor trouble shooting
        by Dongrossmd
        I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
        1 week ago
      • ssms5411
        New stereo
        by ssms5411
        Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
        2 weeks ago

      FORUM SPONSORS

      Collapse
      Working...
      X