Tweet
hey guys can you tell me step by step how to replace the fuel pressure regulator on my 2000 firebird 3.8l v6.
-
2000 firebird w68, auto, t-tops , 3.42 , k&n, whisper lid, taylor 8mm spark plug wires , bosch spark plugs , 3\"in/out carsound CAT , 3\" i pipe, take off trans am muffler, C6 Z06 rims -
Re: fuel pressure regulator replacement
Easy way is to remove the whole fuel rail to get to the c ring. Hard way leave the fuel rail on and try to take off the c ring from behind it on the drivers side.---> almost impossible but can be done with cursing and a mirror to look back their to see what your doing..<a href=\"http://www.cardomain.com/id/lucky19\" target=\"_blank\">http://www.cardomain.com/id/lucky19</a> -
Re: fuel pressure regulator replacement
also you are gonna need a J-tool to get that ring off, if you dont have one you can still do it, but it will be mroe difficult.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment