fuel pressure regulator - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

fuel pressure regulator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fuel pressure regulator

    hey guys, after doing a search i think i have a bad fpr. i have really hard starts and my exhaust smells like gas for the first 10-15 sec. if i shut the car off and start it up within 1-4 mins it starts up fine. but if it sits longer it takes a few seconds.... my question is how much does this part cost and how hard is it to replace... its a 99firebird... thanks for the help

  • #2
    get an aftermarket adjustable one....it's cheaper than stock and you can up the fuel pressure later if you decide to run boost. Holley, JET, and BBK are three companies off the top of my head that make them.
    1993 Camaro 3.4L A4 many mods comin for 2004<br /><br />\"The last thing I wanted was to get in a fight in Jackson, Mississippi on a Saturday night\"

    Comment


    • #3
      how hard is it to replace yourself

      Comment


      • #4
        The fuel pressure regulator on the 3.8 is different than the one for the 3.4. He cannot use the above mentioned ones.
        - Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>

        Comment

        Latest Topics

        Collapse

        • Dongrossmd
          Throttle Position Sensor trouble shooting
          by Dongrossmd
          I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
          2 weeks ago
        • ssms5411
          New stereo
          by ssms5411
          Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
          2 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X