1996-1997 O2 sensor help..need some pics - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

1996-1997 O2 sensor help..need some pics

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    1996-1997 O2 sensor help..need some pics

    Here is my issue, my new engine is a 96 3.8L...has absolutely everything except the catalytic converter 02 sensors and the wiring part they attach to. The only part on the wiring harness that we think might go to the rear sensors has an empty plug.

    If someone could take some pics of 02 sensor placement and where they plug up to wiring harness I would be very very appreciative. I need to know what the connectors look like so I can get the parts to do my install.

    I am gonna put sims in place of the original 02 sensors, but i need to know what the sensors hook up to. Thanks ahead!
    2005 Ford Focus ZX3 SE D20 M5 - Modified ;) <a href=\"http://www.knightenmotorsports.com\" target=\"_blank\">http://www.knightenmotorsports.com</a> <br />[ U R L = h t t p : / / w w w . g e o c i t i e s . c o m / h e a r t l a n d _ h e a t _ v 6 ] Heartland Heat V6 [ / U R L ]
    Tags: None
  • #2
    If you still need them I will be under my car this weekend and can take some pics for you. Sorry I can't do it any sooner, it's almost christmas!!! Busy busy busy

    Comment

    • #3
      any help is appreciated!

      [ December 24, 2003: Message edited by: speedracer95v6 ]</p>
      2005 Ford Focus ZX3 SE D20 M5 - Modified ;) <a href=\"http://www.knightenmotorsports.com\" target=\"_blank\">http://www.knightenmotorsports.com</a> <br />[ U R L = h t t p : / / w w w . g e o c i t i e s . c o m / h e a r t l a n d _ h e a t _ v 6 ] Heartland Heat V6 [ / U R L ]

      Comment

      • #4
        Anyone know what i'm talking about? The connector that runs from the main wiring harness to the rear o2 sensors at the catalytic converter.

        I need a pic of one or the actual part! If someone can take some pics it would help a whole lot! just need to know what that part looks like
        2005 Ford Focus ZX3 SE D20 M5 - Modified ;) <a href=\"http://www.knightenmotorsports.com\" target=\"_blank\">http://www.knightenmotorsports.com</a> <br />[ U R L = h t t p : / / w w w . g e o c i t i e s . c o m / h e a r t l a n d _ h e a t _ v 6 ] Heartland Heat V6 [ / U R L ]

        Comment

        • #5
          They did switch from 4 total O2 sensors to 3. I don't remember what year but it is possible that it was 95-96. If thats the case the post cat sensor is the only one you have and you only need one sim. BTW....no need to do more than 1 sim....even if you have the post and pre cat sensors.
          <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

          Comment

          • #6
            Nope, my '95 has 4.
            95 Camaro 3.8L Y2K motor <br /><a href=\"http://www.cardomain.com/id/coriya71\" target=\"_blank\">www.cardomain.com/id/coriya71</a>

            Comment

            • #7
              The problem I have begins here:

              I have a 95 with the 3.4L.

              I am putting a 96 3.8L in.

              I have all accessories, computer, wiring harness, and front o2 sensors(on exhaust manifolds) except the rear o2 sensors and their wiring stuff didn't come with the engine.

              There are no cut wires on the wiring harness I have, so I have been led to the conclusion they connect to one empty connector. I just do not know what the wiring from the connector looks like or how many o2 sensors.
              2005 Ford Focus ZX3 SE D20 M5 - Modified ;) <a href=\"http://www.knightenmotorsports.com\" target=\"_blank\">http://www.knightenmotorsports.com</a> <br />[ U R L = h t t p : / / w w w . g e o c i t i e s . c o m / h e a r t l a n d _ h e a t _ v 6 ] Heartland Heat V6 [ / U R L ]

              Comment

              • #8
                Anyone?

                Can i run the engine with no trouble(short of an SES light) without the catalytic converter sensors? If thats the case, i'm all for removing that cursed bulb.

                [ January 01, 2004: Message edited by: speedracer95v6 ]</p>
                2005 Ford Focus ZX3 SE D20 M5 - Modified ;) <a href=\"http://www.knightenmotorsports.com\" target=\"_blank\">http://www.knightenmotorsports.com</a> <br />[ U R L = h t t p : / / w w w . g e o c i t i e s . c o m / h e a r t l a n d _ h e a t _ v 6 ] Heartland Heat V6 [ / U R L ]

                Comment

                • #9
                  I don't have pictures. I have one O2 just before the cat, and another one right after the cat.
                  1996 3.8 Firebird with some mods

                  Comment

                  Previous template Next

                  Latest Topics

                  Collapse
                  • Andy H
                    Transmission removal help!!
                    by Andy H
                    Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                    2 weeks ago
                  • 2.8 Bird
                    Abs inop
                    by 2.8 Bird
                    Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                    3 weeks ago
                  • fishin
                    Intermittent Headlight Function 97 Firebird
                    by fishin
                    I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                    3 weeks ago
                  View All

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X

                  We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                  By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                  I Agree