Tweet
my brake rotors look very rusty, how can I clean them is there like a special thing to clean them with? thanks in advance.
-
-
use them
or buy the coated rotors that don't rust
www.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
-
you need zinc coated rotors...I made the same mistake buying non zinced ones.....UGLY!
You can sand down the hub of the rotors and paint them etc etc, but the outer edges of the rotor is a different story. I won't be putting the time into making them look good, I'll just be buying new ones.W68, K&N, Flowmaster, Walker Cat, 18 x 9.5 Chrome Y2k C5\'s w/ 275/35/18 Kumho 712\'s, Susp Tech 1.2 inch drop front, 1.7 inch drop rear, Hotchkis Adj PHR,Slotted/Cross Drilled Rotors<br />Hawk Pads<br />Pics: <a href=\"http://community.webshots.com/user/franjobc-date\" target=\"_blank\">http://community.webshots.com/user/franjobc-date</a>Comment
-
well mine are the stock rotors, I was thinking about buying new ones but they are really expensive for my budget right now, thats why I wanted to see If I could clean them, I dont mind if it takes a lot of time.Comment
-
sandblast/sand the center and paint it. Stay clear of the actual rotor part though.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment