Tweet
cam removal
im trying to remove my cam in my 3.4 and i heard that theres a bolt in the back holding it in. i only saw one bolt on the drivers side in the back and i think its on the head. does anyone know if there is one or not?
-
-
Re: cam removal
ok in my haynes manual it says oil pump drive at the back and has a clip on it. now thats the big round thing in the back kinda to the passengers side right? -
Re: cam removal
I do not know of the exact location but nothing else I am aware is back there even close to being similar.Comment
-
Re: cam removal
never done it but the manual says you have to
1) loosing the rockers out of the way and take out the lifters(make sure you lable them some how to make sure you put them back in the right place)...
2)then you take off the timing cover and sprocket
3)make room in the front....by taking off the radiator, etc
4)and yes also take off the oil pump drive .....if you have a haynes its on page 2a-9....top right...this parts is more near the back of the motor near the passenger side head...it has one bolt that hold the c like clamp then you pull it out...you might have some trouble taking it out i tried and couldnt...but it says it just comes straight out.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...4 weeks ago
Comment